Thru-beam sensor (pair) OBE10M-18GF60-S2PP-0,3M-V1-IR
- Sensing range 10 m
- With increased sealing, degree of protection IP68
- Integrated circuit
- Narrow opening angle, suitable for mounting in pairs
- Not sensitive to ambient light
- DC voltage version
- Test input
- Reverse polarity protection
- Short-circuit protected
- Switching status indicator, yellow LED
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens OBE10M-18GF60-S2PP-0,3M-V1-IR
| Productbeschrijving |
|---|
| Thru-beam sensor, M18 threaded housing design, plastic housing, 10 m detection range, infrared light, light/dark on, DC version, 2 push-pull outputs, fixed cable with M12 plug |
| System components | ||
|---|---|---|
| Emitter | OBE10M-18GF60-S-0,3M-V1-IR | |
| Receiver | OBE10M-18GF60-2PP-0,3M-V1-IR | |
| General specifications | ||
| Effective detection range | 0 ... 10 m | |
| Threshold detection range | 12 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Diameter of the light spot | approx. 1500 mm at a distance of 10 m | |
| Opening angle | Emitter: ± 5 ° ; Receiver: ± 10 ° | |
| Optical face | frontal | |
| Ambient light limit | 10000 Lux | |
| Accessories provided | Mounting nuts | |
| Functional safety related parameters | ||
| MTTFd | 606 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | Emitter: LED green: Power on | |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | Emitter: ≤ 17 mA Receiver: ≤ 13 mA |
|
| Protection class | Class III | |
| Input | ||
| Test input | emitter deactivation at 0 V | |
| Output | ||
| Switching type | Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
|
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 80 Hz | |
| Response time | 6 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| CE conformity | CE | |
| UKCA conformity | UKCA | |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
|
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Degree of protection | IP67 / IP68 | |
| Connection | fixed cable with 4-pin, M12 x 1 connector Emitter: black ; Receiver: grey |
|
| Material | ||
| Housing | PC , black | |
| Optical face | Plastic pane | |
| Cable | ||
| Length | 0.3 m | |
| Mass | approx. 25 g per device | |
| Dimensions | ||
| Length | 59 mm | |
| Diameter | 18 mm | |
| Thread size | M18 | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: OBE10M-18GF60-S2PP-0,3M-V1-IR
Approvals: OBE10M-18GF60-S2PP-0,3M-V1-IR
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3 | ALL | 1806 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-6980AHOL | HOL | 218 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6981 | ALL | 222 KB | |
| UK Declaration of Conformity (P+F) | TDOC-6981AENG | ENG | 195 KB | |
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
Of het nu om glas, zonnewafers of printplaten gaat, de optische sensoren van de ML100-series zijn volledig toegespitst op de vereisten van verschillende, gecompliceerde detectietaken. Leer meer over deze productportfolio...
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.