Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Productbeschrijving |
---|
Universal distance sensor, measurement to object, 6 m detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, fixed cable with M12 plug |
General specifications | ||
---|---|---|
Measurement range | 0.2 ... 6 m | |
Reference target | Kodak white (90%) | |
Light source | laser diode | |
Light type | modulated visible red light modulated infrared light |
|
Laser nominal ratings | ||
Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
Laser class | Measuring laser: 1 Alignment laser: 2 |
|
Wave length | Measuring laser: 905 nm Alignment laser: 650 nm |
|
Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad | |
Pulse length | Measuring laser: 6 ns Alignment laser: 0.25 µs | |
Repetition rate | Measuring laser: 40 kHz Alignment laser: 1 kHz | |
Maximum optical power output | Measuring laser: 1.8 W Alignment laser: 3 mW | |
Measuring method | Time of flight measurement | |
Diameter of the light spot | 4 mm x 12 mm at a distance of 6 m | |
Ambient light limit | 5000 Lux | |
Temperature influence | typ. ≤ 1.2 mm/K | |
Indicators/operating means | ||
Operation indicator | LED green | |
Function indicator | LED yellow: switching state (2x) , LED orange : Operating mode | |
Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
Parameterization indicator | LED red (4x) | |
Electrical specifications | ||
Operating voltage | 18 ... 30 V DC , class 2 | |
Ripple | 10 % within the supply tolerance | |
No-load supply current | ≤ 125 mA / 24 V DC | |
Time delay before availability | ≤ 300 ms | |
Output | ||
Switching type | light/dark on, switchable | |
Signal output | 2 PNP, short-circuit protected | |
Switching current | max. 100 mA | |
Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
Voltage drop | ≤ 2.4 V | |
Deviation of the characteristic curve | typ. ≤ ± 40 mm | |
Switching frequency | Fast: 40 Hz / Slow: 16 Hz | |
Response time | Fast: 13 ms / Slow: 80 ms | |
Repeat accuracy | Fast: ≤ ± 15 mm / Slow: ≤ ± 10 mm | |
Compliance with standards and directives | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2 | |
Standard conformity | ||
Laser class | IEC 60825-1:2001 | |
Approvals and certificates | ||
Approvals | CE | |
Ambient conditions | ||
Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | fixed cable 200 mm with M12 connector, 5 pin | |
Material | ||
Housing | ABS | |
Optical face | PMMA | |
Mass | 200 g | |
Dimensions | ||
Height | 93 mm | |
Width | 95 mm | |
Depth | 42 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27270916 |
ECLASS 12.0 | 27270916 |
ECLASS 11.0 | 27270801 |
ECLASS 10.0.1 | 27270801 |
ECLASS 9.0 | 27270801 |
ECLASS 8.0 | 27270801 |
ECLASS 5.1 | 27270801 |
ETIM 9.0 | EC001825 |
ETIM 8.0 | EC001825 |
ETIM 7.0 | EC001825 |
ETIM 6.0 | EC001825 |
ETIM 5.0 | EC001825 |
UNSPSC 12.1 | 41111613 |
Brief Instructions | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 946 KB |
CAD | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 1524 KB |
Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|---|
EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
De afstandssensoren met geavanceerde technologieën bieden de hoogste mate van nauwkeurigheid en betrouwbaarheid...