Niet beschikbaar voor verkoop
Ultrasonic sensor UCC1000-30GM-E6-V1
- 2 independent switch outputs
- High chemical resistance through PTFE coated transducer surface
- Switch points can be taught-in
- Window mode selectable
- Temperature compensation
- Compact design
- Plug connection
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Technische gegevens UCC1000-30GM-E6-V1
| Productbeschrijving |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 200 ... 1000 mm | |
| Dead band | 0 ... 200 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 175 kHz | |
| Response delay | ≤ 100 ms | |
| Indicators/operating means | ||
| LED yellow | switching state output 1, program function output 1 switching state output 2, program function output 2 |
|
| LED red/green | solid green: Power on green, flashing: program function, object detected solid red: Connector removed red, flashing: error, program function object not detected |
|
| Temperature/teach-in connector | Temperature compensation , Switch points programming , output function setting | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
| Power consumption | ≤ 600 mW | |
| Output | ||
| Output type | 2 switch outputs PNP, NO/NC | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V DC | |
| Repeat accuracy | ≤ 0.1 % of full-scale value | |
| Switching frequency | ≥ 5 Hz | |
| Range hysteresis | ≤ 3.2 % of the set operating distance | |
| Temperature influence | < 2 % of full-scale value (≤ 0.2 % / K without temperature compensation) | |
| Standard conformity | ||
| Standards | EN 60947-5-2 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | Stainless steel, PTB | |
| Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated | |
| Mass | 153 g | |
| Dimensions | ||
| Length | 96 mm | |
| Diameter | 32 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UCC1000-30GM-E6-V1
Datasheet: UCC1000-30GM-E6-V1
| Datasheet | Bestandstype | Bestandsgrootte |
|---|---|---|
| Datasheet UCC1000-30GM-E6-V1 | 187 KB | |
| Fiche de données UCC1000-30GM-E6-V1 | 192 KB | |
| Datenblatt UCC1000-30GM-E6-V1 | 193 KB | |
| Hoja de datos UCC1000-30GM-E6-V1 | 232 KB |
Documents: UCC1000-30GM-E6-V1
| Instruction leaflets | Bestandstype | Bestandsgrootte |
|---|---|---|
| Instruction leaflet / Beipackzettel | 229 KB |
CAD+CAE: UCC1000-30GM-E6-V1
| CAD | Bestandstype | Bestandsgrootte |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 40 KB |
Aanverwante producten: UCC1000-30GM-E6-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.