Serviceline Industriële Sensoren
Serviceline Explosiebeveiliging

Optical data coupler LS610-DA-P/F2/35

LS610-DA-P/F2/35
  • Devices for PROFIBUS
  • Problem-free light beam interruption due to TVT (Telegram Verification Technology)
  • Plug connection for fast mounting
  • Simple programming without opening the device
  • Usable up to detection range 0
  • Line indicator for signal strength

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:


Technische gegevens  LS610-DA-P/F2/35

Productbeschrijving
Optical data coupler for PROFIBUS, 240 m detection range, infrared light, M12 plug
General specifications
Effective detection range0 ... 240 m
Threshold detection range260 m
Light typemodulated infrared light
Diameter of the light spot2 m at a distance of 100 m
Opening angle1.1 °
Ambient light limit> 10000 Lux
Functional safety related parameters
MTTFd250 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Data flow indicatorLED green: emitter
LED yellow: receiver LED red: faulty telegram
Function indicatoralignment aid: flashing front red LED Signal strength (8 LED: Red, yellow, green) Baudrate, operating mode
Control elementsmembrane keys, 2 keys, can be electrically locked
Electrical specifications
Operating voltage18 ... 30 V DC
No-load supply current200 mA
Data rate93.75; 187.5;(350); 500;1500 kBit/s , adjustable
Operation frequencyF2 = 12.5 MHz
Interface
Interface typePROFIBUS, galvanically isolated
Input
Function inputKeylock, internal Pull-up resistor
keypad locked with 0 V
Output
Stability alarm output1 PNP (switches if there is sufficient stability control) short-circuit protected, max. 200 mA
Conformity
Product standardEN 60947-5-2
Approvals and certificates
ApprovalsCE, cULus
Ambient conditions
Ambient temperature-10 ... 50 °C (14 ... 122 °F)
Storage temperature-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protectionIP65
Connection4-pin, M12x1 connector, standard (supply) ,
5-pin, M12x1 connector, B-coded (Bus In) ,
5-pin, M12x1 socket, B-coded (Bus Out/Termination)
Material
HousingABS / PC
Optical faceplastic
Mass700 g
Dimensions
Height90 mm
Width170 mm
Length171 mm

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.143201404

Details: LS610-DA-P/F2/35

Product Documentation: LS610-DA-P/F2/35

Taalkeuze:
ManualsTaalBestandstypeBestandsgrootte
Instruction Manual Optical data Coupler LS610-DAENGPDF484 KB

Design / Simulation: LS610-DA-P/F2/35

Taalkeuze:
CADTaalBestandstypeBestandsgrootte
CAD 3-D / CAD 3-DALLSTP3203 KB
CAD Portal / CAD PortalALLLINK---

Approvals: LS610-DA-P/F2/35

Taalkeuze:
CertificatesCertificaatnummerTaalBestandstypeBestandsgrootte
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2229CALLPDF229 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6933ALLPDF226 KB

Aanverwante producten: LS610-DA-P/F2/35

Accessories

Female connector M12 straight A-coded 5-pin, for cable diameter 6 - 8 mm, field-attachablefa
Terminal resistor for PROFIBUSfa
Function grounding for LS610 / LS611 / VDM100 seriesfa
M12 protective cap set (connector + socket) for series LS610 / LS611fa
Mounting bracket for optical data couplerfa
Direct mounting set consisting of 4 x M4 threaded insertsfa
Mounting bracket with deviation mirror for optical data couplerfa
Mounting bracket for optical data coupler and distance measurement devicesfa

Ontdek de verschillende features van de LS682, vooral zijn eenvoudige uitlijning en inbedrijfstelling...