Serviceline Industriële Sensoren
Serviceline Explosiebeveiliging

Print mark luminescence scanner DK50-UV-190/79d/115b/147

DK50-UV-190/79d/115b/147
  • Detect fluorescent chalk marks, clear glue, tamper-proof seals and other marks that regular contrast sensors cannot
  • Detect marks on irregular backgrounds
  • Sense invisible or nearly invisible marks
  • Compact, space-saving construction
  • Integral timer available
  • Differentiate degrees of luminescent contrast
  • Automatic or incremental teach

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:


Technische gegevens  DK50-UV-190/79d/115b/147

Productbeschrijving
Print mark luminescence scanner, detection range: 190 mm, UV light, light/dark on, Teach-In, timer function, measurement output, NPN output, PNP output, cable with M12 plug
General specifications
Detection range0 ... 190 mm
Light sourceLED
Light typemodulated UV light
Light spot representation2.2 mm at 25.4 mm sensor range
Teach-inIncremental or automatic
Indicators/operating means
Operation indicatorLED green, 15 ms off delay timer
LED green (x8), for contrast level indication
Function indicatorLED red, lights up with receiver lit
Teach-in indicatorAutomatic Teach-In: green contrast LEDs turn on and off once from levels 1 through 8 then level 8 LED flashes twice
Incremental Teach-In: green contrast level LED position may change
Control elementsPush buttons for automatic or incremental Teach-In, L.O./D.O. mode, and/or off-delay timer
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply current50 mA
Output
Switching typelight on / dark on
Signal output1 PNP and 1 NPN short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching current150 mA
Measurement output0 - 5 V DC
Rmin = 1 kΩ
Switching frequency2.5 kHz
Response timeDiscrete Output 200 µs
Analog output 1 ms
Approvals and certificates
ApprovalsCE, cULus
Ambient conditions
Ambient temperature-15 ... 60 °C (5 ... 140 °F)
Storage temperature-15 ... 70 °C (5 ... 158 °F)
Mechanical specifications
Degree of protectionIP67
Connection152.4 mm fixed cable with 5-pin, M12 x 1 connector
Material
HousingPolycarbonate
Optical faceAcrylic
Mass91 g
Dimensions
Height64.9 mm
Width22.9 mm
Depth56 mm

Classifications

SystemClasscode
ECLASS 13.027270908
ECLASS 12.027270908
ECLASS 11.027270908
ECLASS 10.0.127270908
ECLASS 9.027270908
ECLASS 8.027270908
ECLASS 5.127270908
ETIM 9.0EC001822
ETIM 8.0EC001822
ETIM 7.0EC001822
ETIM 6.0EC001822
ETIM 5.0EC001822
UNSPSC 12.139121528

Details: DK50-UV-190/79d/115b/147

Informative Literature: DK50-UV-190/79d/115b/147

Taalkeuze:
We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: DK50-UV-190/79d/115b/147

Taalkeuze:
Brief InstructionsTaalBestandstypeBestandsgrootte
Instruction leaflet / BeipackzettelALLPDF617 KB

Design / Simulation: DK50-UV-190/79d/115b/147

Taalkeuze:
CADTaalBestandstypeBestandsgrootte
CAD 3-D / CAD 3-DALLSTP119 KB
CAD Portal / CAD PortalALLLINK---

Aanverwante producten: DK50-UV-190/79d/115b/147

Accessories

Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable greyfa
Right-Angled Mounting Bracketfa