Serviceline Industriële Sensoren
Serviceline Explosiebeveiliging

Retroreflective sensor RLK29-55/59/116

RLK29-55/59/116
  • Robust, compact photoelectric sensor for single-beam gate protection
  • Not sensitive to ambient light, even with energy saving lamps
  • Tamper-proof, no operating controls
  • Version for universal voltages
  • Relay output

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:


Technische gegevens  RLK29-55/59/116

Productbeschrijving
Robust, compact, long range photoelectric sensors for detecting people, objects and vehicles
General specifications
Effective detection range0 ... 12 m
Reflector distance0.04 ... 12 m
Threshold detection range14 m
Reference targetH85-2 reflector
Light sourceLED
Light typemodulated visible red light , 640 nm
Diameter of the light spotapprox. 35 mm at a distance of 12 m
Opening angle± 1 °
Ambient light limit90000 Lux
Functional safety related parameters
MTTFd1460 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED red
illuminates: when beam is free
flashes: when level falls below function reserve
off: when beam is interrupted
Electrical specifications
Operating voltage24 ... 230 V AC/DC
Ripple10 %
No-load supply current≤ 8.5 mA
Power consumption0.2 W at 24 V DC , 1.8 W at 230 V AC 3 VA
Output
Switching typedark-on
Signal outputRelay, 1 alternator
Switching voltage230 V AC
Switching currentmax. 2 A
Switching frequency7 Hz
Response time50 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
CE conformityyes
UL approvalcULus Listed
Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508.
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP67
Connectionterminal compartment
Material
HousingPlastic ABS, flame resistant
Optical facePlastic pane
Mass100.7 g
Dimensions
Height88 mm
Width25.8 mm
Depth65.5 mm
NoteSafety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly.

Classifications

SystemClasscode
ECLASS 13.027270902
ECLASS 12.027270902
ECLASS 11.027270902
ECLASS 10.0.127270902
ECLASS 9.027270902
ECLASS 8.027270902
ECLASS 5.127270902
ETIM 9.0EC002717
ETIM 8.0EC002717
ETIM 7.0EC002717
ETIM 6.0EC002717
ETIM 5.0EC002717
UNSPSC 12.139121528

Details: RLK29-55/59/116

Informative Literature: RLK29-55/59/116

Taalkeuze:
We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: RLK29-55/59/116

Taalkeuze:
Brief InstructionsTaalBestandstypeBestandsgrootte
Instruction leaflet / BeipackzettelALLPDF394 KB

Design / Simulation: RLK29-55/59/116

Taalkeuze:
CADTaalBestandstypeBestandsgrootte
CAD 3-D / CAD 3-DALLSTP213 KB
CAD Portal / CAD PortalALLLINK---

Approvals: RLK29-55/59/116

Taalkeuze:
CertificatesCertificaatnummerTaalBestandstypeBestandsgrootte
Canada USA UL Ordinary LocationUL-CA-L87056-31-52803002-0 / UL-US-L87056-11-52803002-0ALLPDF545 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4716AALLPDF304 KB

Aanverwante producten: RLK29-55/59/116

Kit
Robust, compact photoelectric sensor for single-beam gate protection, Not sensitive to ambient light, even with energy saving lamps, Tamper-proof, no operating controls, Version for universal voltages, Relay output, Light source: LED, Light type: modulated visible red light , 640 nm, Operating voltage: 24 ... 230 V AC/DC, Switching type: dark-on, Signal output: Relay, 1 alternatorfa
Accessories
Mounting bracket fa
Mounting bracket for rear wall mountingfa
Mounting bracket for rear wall mountingfa
Mounting bracket: mounting aid for sensors in the RL* seriesfa
Reflective tape 100 mm x 100 mmfa
Reflector, round ø 84 mm, central mounting holefa
Reflector, rectangular 182 mm x 42 mm, mounting holesfa
Reflector, rectangular 60 mm x 18 mm, mounting holesfa
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa
Reflector with mounting holesfa
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa