[Land selecteren]   Nederland
You must have cookies enabled to get the best browsing experience on our website.
Learn how to enable cookies.


SMART Transmitter Power Supply/Current Driver
HiD2024
Overview
Literature
View All Products
Product Information
Datasheet
Product Features
Technical Documents
Approvals+Certificates
Datasheet as PDF in following languages:
ENG
DEU
Technical Data
General specifications
Signal typeAnalog input
Supply
Connectionvia Termination Board
Rated voltage20.4 ... 30 V via Termination Board
Ripple≤ 10 %
Rated current140 mA at 24 V and 20 mA
Power loss≤ 1.8 W at 20 mA
Power consumption≤ 3.3 W at 20 mA
Hazardous area connection
Connectionterminals 1+, 4-; 2+, 5-; 3+, 6-; 7+, 8-
Input signal4 ... 20 mA , limited to approx. 30 mA
Available voltage≥ 15 V at 20 mA
Output signal4 ... 20 mA
Output load0 ... 650 Ω
Safe area connection
Connectionterminals 11+, 14-; 12+, 15-; 13+, 16-; 17+, 18-
Input signal4 ... 20 mA
Voltage dropapprox. 6 V or internal resistance 300 Ω at 20 mA
Output signal4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt)
4 ... 20 mA (sink mode), operating voltage 15 ... 26 V
Output load0 ... 300 Ω (source mode)
Ripple20 mV rms
Transfer characteristics
Deviationat 20 °C (293 K)
≤ ± 0.1 % incl. non-linearity and hysteresis (source mode 4 ... 20 mA)
≤ ± 0.2 % incl. non-linearity and hysteresis (sink mode 4 ... 20 mA)
≤ ± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V)
≤ ± 0.2 % incl. non-linearity and hysteresis (analog output mode 4 ... 20 mA)
Frequency rangehazardous area into the safe area: bandwidth with 0.5 Vss 0 ... 3 kHz (-3 dB)
safe area into the hazardous area: bandwidth with 0.5 Vss 0 ... 3 kHz (-3 dB)
Rise time10 to 90 % ≤ 20 ms
Indicators/settings
LED PWRgreen
DIP-switchselection of operating mode: current source, current sink or voltage source
Factory settinganalog input with source output
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Conformity
Electromagnetic compatibilityNE 21
Protection degreeIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C
Mechanical specifications
Protection degreeIP20
MaterialPolycarbonate
Massapprox. 140 g
Dimensions18 x 106 x 128 mm (0.7 x 4.2 x 5 in)
Data for application in conjunction with hazardous areas
EC-Type Examination CertificateCESI 02 ATEX 086 , for additional certificates see www.pepperl-fuchs.com
Group, category, type of protectionEx-Hexagon II (1)GD [Ex ia] IIC, [Ex iaD] [circuit(s) in zone 0/1/2/20/21/22]
Statement of conformityPepperl+Fuchs
Group, category, type of protection, temperature classificationEx-Hexagon II 3G Ex nA II T4 X
Directive conformity
Directive 94/9/ECEN 60079-0, EN 60079-11, EN 61241-11, EN 61241-0, EN 60079-15 , EN 60079-26
View All Products

Informatie+Service

Telefoon +31 (0)73-750 71 07
Fax +31 (0)73-644 47 49